Drinking filtered water is one of the best things you can do for your health. However, it’s not always the easiest to find.
If you’re lucky enough to live in an area where you can easily find water that has gone through a water filtration system, good for you, but if you’re like most people who have to rely on bottled water or unfiltered tap water, then you can still improve the quality of your drinking water by following these tips.
Use a quality filter.
The quality of your filter primarily determines the quality of your water. Therefore, you want to buy one that’s NSF-certified to ensure it removes at least 99% of lead, chlorine, and other contaminants.
If you live in an area with higher levels of contamination, consider buying a more expensive model with additional features like carbon filtration for removing organic contaminants like pesticides, herbicides, and pharmaceuticals.
Change the filter regularly.
The time you should wait between changing your water filter depends on how often you use it. If you’re using filtered water for drinking and cooking daily, change it once every six months to one year.
If you’re only using it occasionally or want to thoroughly clean it every few years, change it once or twice per year or whenever the flow rate slows down or stops altogether.
Clean the filter regularly
Many people forget about their water filters until they stop working correctly due to clogging with sediment build-up or biofilm accumulation, a thin layer of microorganisms that can form on surfaces.
However, if you clean them regularly with vinegar, baking soda, or bleach solution, this won’t happen as often.
Don’t overuse chlorine.
Chlorine doesn’t last long in your water supply, so you don’t need to treat your entire volume every time you fill up a glass or run the dishwasher.
Instead, add chlorine only when necessary, such as when someone in your household has been sick with diarrhea or vomiting, or after an emergency, such as a broken pipe that could contaminate your water system.
Use a filter made from 100% coconut shell-activated carbon
If you live in an area where the water quality is questionable, you may have heard of activated carbon filters. Even if you don’t have bad water, they can improve your drinking water quality by removing chlorine and other unwanted chemicals.
Activated carbon filters are made from coconut shells or other organic materials specially treated with steam and heat to create a highly porous structure. This allows them to trap dirt, contaminants, and chemicals much better than a standard filter.
Buy a good-quality whole-house filter.
Whole house filters are usually installed under the sink in your kitchen or bathroom, depending on where your incoming water supply enters. These filters remove most impurities from your drinking water, but they’re expensive and require regular maintenance, which can be time-consuming.
Use a reverse osmosis filter.
Reverse osmosis filters use pressure to force filtered water through semipermeable membranes that separate dissolved solids from the liquid. It’s important to note that reverse osmosis filters do not remove all impurities.
They only remove dissolved solids, but they can help reduce levels of arsenic and nitrates in drinking water.
Bottom Line
The quality of the water you drink directly affects your health. Water is essential to your body, and you need it to survive. However, the quality of water may vary from place to place and even from time to time.
The water in your locality might be contaminated with chemicals or other harmful substances that adversely affect your health. Thankfully, investing in a whole house water filtration, Warren, can help you mitigate that.